Sale!

TP4056 DC 5V 1A Mini Micro USB Interface Lithium Battery Charging Board DIY Charger Module

Original price was: 70.00৳ .Current price is: 50.00৳ .

Category:

Product details of TP4056 DC 5V 1A Mini Micro USB Interface Lithium Battery Charging Board DIY Charger Module

Charge module – Linear charging.

 

TP4056 module price in bangladesh bdt 50 tk

  • Current – 1A adjustable.
  • Charge precision – 1.5%.
  • Input voltage – 4.5V-5.5V.
  • Full charge voltage – 4.2V.
  • Led indicator – red is charging Green is full charged.
  • Input interface – micro USB.
  • Work temperature -10° to +85°.
  • Inversed polarity – NO.
  • Size – small to 25X19X10mm.
  • NOTE:
  • 1. Ampere meter can only be connected to 5v input end of the module.
  • 2. It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
  • 3. The connection wire should not be too thick.
  • 4. Make sure the connect point is good.
  • 5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-substract the charging current to avoid burn damage to chip.
  • 6. NO Reveral polarity.
  • TP4056 DC 5V 1A Mini Micro USB Interface Lithium Battery Charging Board DIY Charger Module
  •  Charge module – Linear charging.
  • Current – 1A adjustable.
  • Charge precision – 1.5%.
  • Input voltage – 4.5V-5.5V.
  • Full charge voltage – 4.2V.
  • Led indicator – red is charging Green is full                 charged.
  • Input interface – micro USB.
  • Work temperature -10° to +85°.
  • Inversed polarity – NO.
  • Size – small to 25X19X10mm.

আমাদের প্রোডাক্টগুলো চেক করে দেওয়া হয় এবং ডেলিভারি চার্জসহ আপনাকে আগে পেমেন্ট করতে হবে এরপরে আমরা প্রোডাক্ট আপনাকে পাঠাবো

TP4056 module  type c buy

 

TP4056 module

  • NOTE:

 

  • 1. Ampere meter can only be connected to 5v input end of the module.
  • 2. It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
  • 3. The connection wire should not be too thick.
  • 4. Make sure the connect point is good.
  • 5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-substract the charging current to avoid burn damage to chip.
  • 6. NO Reveral polarity.

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Home
Categories
Page Back